one of the important issues in hydraulic engineering is inspection of local scour depth around bridge pier. using piles is one of the ways for confronting local scour and erosion. in this study, the experiments were conducted in an 8m long, 0.5m deep and 0.25m wide flume. and the effectof using piles and number of them observed on the amount of scour in three different frude numbers. the shape ...

One of the important issues in hydraulic engineering is inspection of local scour depth around bridge pier. Using piles is one of the ways for confronting local scour and erosion. In this study, the experiments were conducted in an 8m long, 0.5m deep and 0.25m wide flume. And the effectof using piles and number of them observed on the amount of scour in three different Frude numbers. The shape ...

Local scour around bridge piers and abutments is one of the most significant causes failure. Despite a plethora studies on individual or abutments, few have focused joint impact pier an abutment in proximity to another scour. This study conducted laboratory experiments flow analyses examine interaction their effect clear-water The were rectangular flume. They included 18 main tests (with combin...

We investigated an electronic portal image device (EPID)-based method to see whether it provides effective and accurate relative dose measurement at abutment leaves in terms of positional errors of the multi-leaf collimator (MLC) leaf position. A Siemens ONCOR machine was used. For the garden fence test, a rectangular field (0.2 20 cm) was sequentially irradiated 11 times at 2-cm intervals. Dev...

Every year a large number of bridges flooding in the river just when they most need them there destroy all born. Carried out. In this study, the four fulcrum forms a semi-circular, trapezoidal, rectangular edges rounded rectangle 90 degrees at 70 degrees in Sagittarius with four different discharges depth of constant scouring around the abutment in pure water were examined. For material of flum...

D6056 prefabricated abutment includes placement D6057 custom abutment includes placement D6058 abutment supported porcelain/ceramic crown D6059 abutment supported porcelain fused to metal crown (high noble metal) D6060 abutment supported porcelain fused to metal crown (predominantly base metal) D6061 abutment supported porcelain fused to metal crown (noble metal) D6062 abutment supported cast m...

This study measured the screw joint preload of the implant-abutment interface for 7 common hex-top abutment systems. Increasingly, prosthetic designs are utilizing a direct prosthetic connection to the implant, placing the implant-abutment screw joint under direct functional loads and moments. Sufficiently high screw joint preloads are required to maintain screw joint integrity and confer clini...

OBJECTIVE The aim of this study was to evaluate the influence of removable partial dentures (RPD) on the periodontal health of abutment and non-abutment teeth. MATERIALS AND METHODS A total 107 patients with RPD participated in this study. It was examined 138 RPD, they were 87 with clasp-retained and 51 were RPD with attachments. The following periodontal parameters were evaluated for abutmen...

PURPOSE This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), c...

PURPOSE This study examined the effects of the abutment types and dynamic loading on the stability of implant prostheses with three types of implant abutments prepared using different fabrication methods by measuring removal torque both before and after dynamic loading. MATERIALS AND METHODS Three groups of abutments were produced using different types of fabrication methods; stock abutment, ...